Floor Standing type energy saving clean room air handling units

Assembled energy recovery unit crossflow plate heat exchanger Fexible combination Excellent thermal insulation

Functions of  Floor Standing type energy saving clean room air handling units  

Frost resisting cold bridge design

Double-skin panel sandwiched with high density PU foam, thermal conductivity below 0.01999W/m•°C,

insuring high performance between -40°C and +70°C.

High mechanical strengthGalvanized sheet inner skin, color steel sheet outer skin, strong steel framework, pressure endurance up to 2000Pa, suitable for large air application.

High air impermeabilityDouble inlaid sealing to join the frameworks and panels tight, minimizing air leakage.

  

Flexible combinationDesigned with 102mm modulus, frameworks and panels are flexible to change according to design requirements.

HEAT EXCHANGER SECTION

Rotary heat exchanger

The wheel transfers the energy (cold or heat) contained in exhaust air to the fresh air supplied to indoor.It’s a piece of important equipment and a key technology in the field of construction energy saving.

Plate-fin heat exchanger

It is made up of thin flat plates and corrugated plates. These two types plates form channels for fresh or exhaust air stream. When the two air steams are passing through the exchanger crossly with temperature difference, the energy is recovered. Both sensible heat exchanger and total heat exchanger are available.

FAN SECTION

AIR FILTER SECTION 

Coarse filter---corrugated plate type, 25mm or 46mm in thickness, made of nylon or non-woven fabrics, efficiency rating at G2, G3.

 Medium filter---bag type, made of fire-proof chemical fibres, efficiency rating at F5~F8.High-medium/sub-HEPA filter---bag or pleat type, made of fiberglass, efficiency rating at F8~H10.

COOLING/HEATING SECTION